Abstract
In order to investigate the influence of carbon fiber’s surface state on the interlaminar shear properties of carbon fiber-reinforced plastic (CFRP) laminate, the carbon fiber’s surface state was modified by thermal treatment at elevated temperatures. The interlaminar shear strength (ILSS) of CFRP laminates reinforced with treated fibers was measured by means of short-beam shear test, and the surface state of fiber was characterized by Electron Spectroscopy for Chemical Analysis (ESCA) analysis to reveal the dominate factor for controlling the ILSS. Combining the ILSS measurement with the ESCA analysis, the results indicated that: (1) the ILSS is strongly dependent on the oxygen-containing functional groups on the surface of carbon fiber; (2) the fiber treated at 600 °C has the highest oxygen-containing functional groups that lead to the highest ILSS of CFRP; and (3) at temperatures beyond 600 °C, the oxygen-containing functional groups decrease with increasing the heat treatment temperature, resulting in a low ILSS of CFRP laminates. Furthermore, from the microstructure observation, it was found that the CFRP mainly failed in the mode of multi-interlaminar shear. The multi-interlaminar shear failure in the CFRP laminates with low ILSS is more severe due to a weak fiber-matrix interface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
