Abstract
This study uses numerical methods to investigate the influence of bow shape and model scale on the natural transition in bow boundary layers on underwater axisymmetric bodies with a superhydrophobic surface. The transition locations for eight bow shapes and four model scales are predicted by using the eN method, which is based on a linear stability theory. The results show that the superhydrophobic surface always stabilizes the boundary layer and delays the transition for different bow shapes and model scales. However, differences are observed in the basic laminar flow, boundary-layer stability, and transition location when different bow shapes are used. These differences are not prominent at the small model scale, but become significant at the medium and large model scales. As the model scale increases, the transition location in the boundary layer on the superhydrophobic surface moves upstream and then downstream, leading to a “dangerous” scale, at which the transition location is closest to the leading edge. Furthermore, this study provides the optimal bow shape with the latest transition location at each model scale, and the optimal bow shape with the longest transition delay distance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.