Influence of bonding phases on properties of in-situ bonded porous SiC membrane supports

Abstract

Porous SiC ceramic membrane supports are widely employed in a wide variety of high-temperature applications, such as hot flue gas filtration, porous burners and molten metal filters. Herein, SiC supports, with a porosity of ~37%, were prepared by using low-temperature bonding techniques and the influence of different bonding phases, such as mullite, cordierite and glass, on ambient-temperature flexural strength, hot modulus of rupture (HMOR), thermal shock resistance and oxidation resistance were systematically investigated. The results reveal that the glass-bonded SiC (GBSC) support exhibited the highest ambient-temperature flexural strength of 33.6 MPa, whereas the flexural strength of mullite-bonded SiC (MBSC) and cordierite-bonded SiC (CBSC) supports ranged from 22 to 25 MPa. However, the presence of glass phase deteriorated the high-temperature properties of the support. MBSC support rendered superior mechanical strength at high temperature and self-strengthening in a certain temperature range, such as HMOR improved 47.5% at 900 °C, but HMOR of glass-bonded support was only 57.4% of the ambient-temperature strength. Moreover, MBSC and CBSC supports exhibited better thermal shock resistance than GBSC supports and the critical temperature difference of water quenching for MBSC supports was ~200 °C higher than GBSC supports. In addition, MBSC support rendered superior oxidation resistance and exhibited a weight gain rate of ~0.1% at 1150 °C for 24 h, which is 54.4% and 42.2% lower than CBSC and GBSC supports, respectively.