Abstract
The objective of this study was to prepare crosslinked epoxy networks containing liquid silicone particles in order to improve their mechanical properties and obtain less brittle materials. Different copolymers were used as compatibilizers. These copolymers vary in their chemical composition and structure. All of the copolymers contain hydrophobic (PDMS sequences) and hydrophilic groups. The effect of their chemical structure and architecture on the morphology of the dispersed phase, and on the final physico-chemical and flexural characteristics of epoxy/silicone blends, was explored. The morphology of crosslinked formulations was studied by scanning electron microscopy (SEM), and the thermal characteristics (glass transition temperature, Tg, and curing exothermic peak) were determined by differential scanning calorimetry (DSC). The experimental results have shown that the average diameter and particle size distribution of silicone particles depend on the chemical structure and architecture of the compatibilizers. One copolymer has been identified as the best compatibilizer, allowing a lower mean diameter and particle size distribution in addition to the best mechanical properties of the final network (less brittle character). This study has consequently evidenced the possibility of creating in situ silicone capsules inside an epoxy network by adding tailored compatibilizers to epoxy/silicone formulations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
