Abstract
Sorghum (Sorghum bicolor L.) popularly known as “Jowar”, a cereal grain found in tropical and subtropical climate. India ranks fifth in total sorghum production with 4.7 million tonnes (USDA, 2020). Sorghum is grown in India in an area about 4.82 m ha with production of 4.78 m tonnes and productivity of 989 kg/ ha.In Karnataka, it is grown in 0.94 m ha with a production of 0.98 million tonnes and productivity of 945 kg/ha (INDIASTAT, 2020). A designed and fabricated laboratory test-rig of a pendulum impact tester was used to conduct the experiment in the Department of Farm Machinery and Power Engineering, College of Agricultural Engineering, Raichur. The experiment was conducted to determine the engineering properties of sorghum stalk. The independent variables viz., two types of blades (smooth edge and serrated blade), four levels different stalk diameters (12, 16, 20, 24 mm) and three levels of blade cutting velocity (4.40, 6.30, 7.40 m/s) were selected. Results showed that the maximum cutting energy of 35.47 J was recorded at a blade cutting velocity of 4.40 ms-1 at 24 mm stalk diameter and the least cutting energy of 5.23 J was recorded for 12 mm stalk diameter at blade cutting velocity of 7.40 m s-1 for serrated blade for smooth edge blade and the more cutting energy was recorded of 28.65 J for 24 mm stalk diameter at blade cutting velocity of 4.40 ms-1 and the least cutting energy 3.55 J were recorded for 12 m stalk diameter at 7.40 ms-1 for serrated cutting blade. The maximum cutting force of 1477.92 N was recorded at a blade cutting velocity of 4.40 ms1 at 24 mm stalk diameter. The least cutting force of 435.81 N was recorded for 12 mm stalk diameter at blade cutting velocity of 7.40 m s-1 for smooth edge blade and for serrated cutting blade, the more cutting force was recorded of 1193.75 N for 24 mm stalk diameter at blade cutting velocity of 4.40 ms-1 and the least cutting energy 295.84 N were recorded for 12 m stalk diameter at 7.40 ms-1.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have