Abstract
Abstract In this study, the overall quality characteristics of ice cream powders (drying yield, moisture content, water activity, bulk density, solubility and glass transition temperature) and ice creams made from their corresponding reconstituted powders (overrun, melting behavior) were analyzed. The effect of spray drying conditions such as inlet air temperature (120, 140 and 160 °C) and feed flow rate (1.5, 3 and 4.5 mL/min) and black mulberry juice addition (15, 30 and 45 %) were included in the design. The results showed that, by increasing inlet air temperature water activity, bulk density and overrun were decreased, while solubility and melting rate of reconstituted powders were increased. Generally, mass recovery percentage of ice cream powders was decreased with increase of feed flow rate and juice concentration at the same air inlet temperature due to the stickiness problem and the low glass transition temperature of components. The following optimum process conditions with the desirability of 0.86 were determined: inlet air temperature of 140 °C, feed flow rate of 1.5 mL/min and juice concentration of 30 %.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
