Abstract

The objectives of this study are to estimate the contributions of kinetic, ohmic and mass transport overpotentials to the overall voltage loss in polymer electrolyte membrane fuel cell (PEMFC) electrodes and to relate these overpotentials to electrode binder properties such as ionic conductivity, ion exchange capacity (IEC) and O(2) permeability. The model electrode binders studied were perfluorosulfonic acid ionomers (PFSA; of IECs 1.35 meq g(-1) and 0.95 meq g(-1)), sulfonated poly ether ether ketone (SPEEK; of IECs 1.35, 1.75 and 2.1 meq g(-1)) and sulfonated poly sulfone (SPSU; of IEC 1.5 meq g(-1)). The O(2) permeability of these binders varied from 0.15 x 10(-12) mol cm(-1) s(-1) for SPSU to 6 x 10(-12) mol cm(-1) s(-1) for PFSA IEC 0.95 meq g(-1) at 80 degrees C and 75%RH. The electrodes prepared were characterized by cyclic voltammetry to estimate electrochemically active surface area (ECA) of platinum. Steady state polarization (V-I) experiments were performed with hydrogen as fuel and oxidants including O(2), 21% O(2)/N(2) (air), 21% O(2)/He (Helox) and 4% O(2)/N(2). The V-I data obtained was analyzed to determine the relative contributions of the different sources of polarization in the electrode. Electrodes prepared with PFSA binders had similar ECAs of 28 m(2) g(-1)-Pt, while those prepared using hydrocarbon binders had an ECA of 10 to 14 m(2) g(-1)-Pt at 80 degrees C and 75%RH. The same trend was seen in mass activity. At optimized binder loadings, a semi-quantitative relationship was obtained relating binder O(2) permeability to the mass transport losses within the electrode. Furthermore, a novel semi-quantitative method of plotting helox-air voltage gain against O(2)-air gain was employed to probe the O(2) transport limitations in the electrodes. Based on this analysis, it is suggested that the SPEEK and SPSU bound electrodes suffered from binder phase diffusion limitations in addition to gas phase diffusion limitation, while the PFSA bound electrodes predominantly exhibited gas-phase diffusion limitations.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call