Influence of Binder Droplet Dimension on Granulation Rate during Fluidized Bed Granulation

Abstract

Here, we statistically identified the critical factor of the granulation rate during the fluidized bed granulation process. Lactose was selected as the excipient and was granulated with several binders, including hydroxypropyl cellulose, hydroxypropyl methyl cellulose, and polyvinylpyrrolidone. The viscosity, density, and surface tension of the binder solution, contact angle, and the work done during adhesion and cohesion between the binder and lactose, mist diameter, Stokes number, and the dimension of the droplet were considered. The Stokes number was defined as the ratio of the inertial force to the viscous-damping force of a particle. We confirmed that droplet diameter after adhesion had the highest correlation coefficient with the granulation rate constant in our investigated parameters. Partial least squares regression revealed two critical principal components of the granulation rate: one relating to the droplet dimension, which is composed of mist diameter and diameter and thickness of the droplet after adhesion of the binder to the lactose surface; and the other relating to wettability, which involves the work done during adhesion and cohesion, surface tension, and the thickness of the droplet after adhesion of the binder to the lactose surface.