Abstract
This work describes an experimental study of the cross-plane thermal conductance of plasma-enhanced chemical vapor deposited (PECVD) diamond films grown as a result of bias-enhanced nucleation (BEN). The diamond films are grown on silicon wafers using a two-step process in which a nucleation layer of amorphous or diamond like (DLC) carbon is first deposited on the silicon under the influence of a voltage bias. Then, conditions are adjusted to allow for polycrystalline diamond (PD) growth. The nucleation layer is essential for seeding diamond growth on smooth substrates and for optimizing PD properties such as grain size, orientation, transparency, adhesion, and roughness. A photoacoustic (PA) technique is employed to measure the thermal conductivities of and the thermal interface resistances between the layers in the diamond film structure. The influence of nucleation layers that are 70, 240, 400, and 650 nm thick on the thermal conductance of the diamond film structure is characterized. The thermal conductivity of the nucleation layer exhibits a thickness dependence for relatively thin layers. For each sample, the thermal conductivity of the PD is higher than 500 Wldrm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-1</sup> K <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-1</sup> (measurement sensitivity limit). A resistive network for the diamond film structure is developed. The resistance at the silicon/nucleation interface is less than 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-9</sup> m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> ldrKldrW <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-1</sup> (measurement sensitivity limit), which is of the order of theoretical predictions. The minimum diamond film structure resistance occurs when the nucleation layer is thinnest. When the nucleation layer is sufficiently thick, it begins to exhibit bulk behavior, and the resistance at the nucleation/PD interface dominates the thermal resistance of the diamond film structure.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Components and Packaging Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
