Abstract
The fracture behavior was investigated on autoclaved lightweight concrete (ALC) block samples, which were prepared from lime, cement and quartz sand at 180°C under the saturated steam pressure for 1 to 16h. After 1h autoclaving, the samples gave C-S-H as an initial product, which further reacted with quartz sand to form 1.1-nm tobermorite. The compressive strength increased from 2.0 to 5.7MPa with the formation of tobermorite, while the fracture energy GF increased from 5.1 to 6.4N/m. The fracture behavior interpreted from the tension softening curves was strongly affected by the formation of tobermorite. Extended autoclaving increased the energy for the initial microcrack formation but resulted in brittle crack growth behavior.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
