Abstract
AbstractNanocrystalline Si:H is an important material for solar cells. The electronic properties of the material depend critically upon the degree of crystallinity, the efficacy of passivation of the grain boundaries and impurities, particularly oxygen, in the material. In this paper, we examine different degrees of passivation of grain boundaries by amorphous Si, by deliberately introducing various thicknesses of amorphous tissue layers at the grain boundaries. The device structure consisted of a p+nn+ cell on stainless steel where the base n layer was fabricated using alternating layers of amorphous (a-Si) and crystalline (nc-Si) phases, creating a superlattice structure. The thicknesses of the amorphous and crystalline phases were varied to study their influence on structural and electrical properties such as grain size and diffusion length. We find that <111> grain continued to be nucleate independently of the thickness of the amorphous layer, but the grain size in <220> grain decreased when the thickness of the tissue layer became very large. We also find that as the thickness of the amorphous tissue layer increased, the quantum efficiency at 800 nm decreased and the open circuit voltage increased. For significant thickness of amorphous layer, the transport properties degrade dramatically, causing an inflection in the I-V curve, probably because of difficulty of holes tunneling across the barriers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.