Abstract
This work aims to present a perspective for porosity formation in three different alloys: A356, A413 and A380.1 by taking into account the addition of Al-B grain refiners: AlTi5B1 and Al3B. The directional solidification method was used, and microstructural changes of the alloys and its correlation with porosity formation were investigated. Pore size, number of pores, average pore length and distribution of pores were statistically analyzed. Also, external shrinkage was examined, and the volume of external shrinkage was calculated. It was found that there was a relationship between external shrinkage and the size and number of pores. As the size and number of pores internally decrease, external shrinkage increases. Additionally, porosity is decreased in all the three Al-Si alloys when Al-B grain refiners are used. The distribution of pore diameters is low when AlTi5B1 is used. Grain refiners have a different effect on porosity formation of Al-Si alloys with regard to their solidification morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
