Abstract
This research work was focused on the development of a new series of high entropy metallic glasses (HE-MGs) combined with higher thermal stability, acceptable soft magnetic property, microhardness and good corrosion resistance by adding various Al content (1–8 at.%) on the basis of Fe25Co25Ni25(Si0·3B0.7)25 high entropy metallic glass using single-roller melt-spinning approach. It is found that the proper addition of Al can efficiently improve the anti-corrosion performance of high entropy metallic glasses, in particular, the corrosion current density is decreased from 7.61 μA/cm2 and 9.26 μA/cm2 for the 1 at.% and 2 at.% Al-added alloys to 5.11 μA/cm2 for the 5 at.% Al-added alloy. However, the improvement of Al content could deteriorate the soft magnetic property and thermal stability of HE-MGs. The saturation magnetization flux density and onset crystallization temperature reduce from 0.85 T to 766.15 K for the 1 at.% Al-added alloy to 0.53 T and 736.75 K for the 8 at.% Al-added alloy. Besides, the Vickers’ microhardness of all investigated alloy ribbons can reach 1124 HV0.2 or above. Therefore, this kind of senary new-type HE-MGs can be used as a promising magnetic shielding metal material with high hardness, superior thermal stability and good anti-corrosion performance for the surface protection of key component in harsh marine corrosive environment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
