Abstract
In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the aged specimens at 350, 400, and 500°C underwent two steps transformation during cooling process while a three steps transformation has been observed for the film aged at 450°C. This behavior clearly demonstrated the heterogeneity in chemical composition and microstructure of the sputtered thin film, which consequently resulted in the martensitic transformation of R and remained B2 to B19' within two steps. According to nano-indentation analysis results, a peak point at aging temperature of 450°C is reached. The temperature hysteresis of all aged films was about 1°C, which can be considered as a positive sign for sensor application.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
