Abstract
The demand for hybrid composites has lately increased due to their extraordinary qualities, which include unique mechanical, tribological, and physical capabilities not found in other materials. These composites improve performance and utility by mixing different reinforcing components, making them highly sought after. However, there is a study gap on the effects of long-term ageing on the tribological characteristics of LM25 (Al–6.6Si–0.2Mg)/Al2O3/SiC metal matrix composites (MMCs). As a result, extensive studies on the influence of ageing temperature on the tribological properties of LM25/Al2O3/SiC MMCs via long-term ageing effects still need to be included. Therefore, this study investigated the metallurgical and hardness properties of stir-cast LM25 alloy reinforced with Al2O3 and SiC particulates with varying ageing temperatures. Furthermore, dry sliding wear behaviour is also examined. The investigation concluded that adding micron-sized Al2O3 and SiC particles to LM25 improves hardness and tribological properties. As the ageing temperature increased, the eutectic particles became coarser. Furthermore, the result illustrates that the coefficient of friction (COF) values also enhanced with wear rates. Higher loads increased the wear rate and COF, whereas higher sliding speeds decreased the COF and wear rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
