Abstract
Silica fume and fly ash are used to replace 10% of cement by weight. They are used either separately or in combination with quarry dust in the concrete mixes. Quarry dust is incorporated to replace 20% and 40% of sand in the respective mixes. Superplasticizer and air entraining admixture are used as chemical admixtures to control the flowability of fresh concrete. This chapter focuses on the physical properties of fresh concrete mixes that are monitored batch by batch. The properties of fresh mixes are determined in respect of slump, slump flow, V-funnel flow, air content, mix temperature, and unit weight. It is observed that the properties, particularly, the flow and the entrained air content are influenced by the presence of mineral and chemical admixtures. In presence of superplasticizer, silica fume provides better flow properties than fly ash. Besides, the incorporation of quarry dust improves the flowability of fresh mixes. The outcome of the study given in the chapter suggests the use of quarry dust as partial replacement of sand to augment the flowability of high performance concrete.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.