Abstract
A new planarization grinding method based on the cluster magnetorheological (MR) effect is presented to grind optical glass in this paper. Some process experiments were conducted to reveal the influence of the species and granularity and content of the abrasive materials in the MR fluid on the machining effect, furthermore, the machining characteristic of grinded surface was studied. The results indicate that the abrasive influences definitively on machining effect of this planarization grinding method based on the cluster MR-effect. Under the certain experiment condition, with the content of the abrasive 10% and grain size 800# of SiC, best machining effect can be achieved. The difference species of abrasive results in various machining effects. As for the removal rate of K9 optical glass: abrasive CeO2 is the best, the Al2O3 is the second and the SiC is the worst. While the surface roughness: abrasive SiC is the lowest,the Al2O3 is the second and CeO2 is the highest.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.