Abstract
The paper presents the issue of improvement control accuracy details directly on metal cutting machine tools. The paper considers indicators of the accuracy of machine tools, certain ways to increase the accuracy of machine tools, describes the methods of reducing errors. Approaches to metal cutting equipment functional diagnostics are considered, namely the parameters verification of a working body positioning to maintain potential of OMV-technologies on a machine. The research objective is to assess the accuracy of measurement depending on machine dynamics specifically on the probing feed rate and the geometrical accuracy of the machine tool using mathematical statistics methods. The test specimina measurements were performed twice: directly on a machine tool with PowerInspect OMV and on embedded software coordinate measurement machine. The similar test was performed before and after machine setting. The component measurement feed rate on a machine tool was determined to affect the results of measurement, and the deviation rate is less at the feed rate being increased. By reducing the position tolerance by a factor of 2, the measurement accuracy is increased by a factor of 3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.