Abstract

BackgroundJoints kinematics assessment based on inertial measurement systems, which include attitude and heading reference system (AHRS), are quickly gaining in popularity for research and clinical applications. The variety of the tasks and contexts they are used in require a deep understanding of the AHRS accuracy for optimal data interpretation. However, published accuracy studies on AHRS are mostly limited to a single task measured on a limited number of segments and participants. This study assessed AHRS sensors kinematics accuracy at multiple segments and joints through a variety of tasks not only to characterize the system’s accuracy in these specific conditions, but also to extrapolate the accuracy results to a broader range of conditions using the characteristics of the movements (i.e. velocity and type of motion). Twenty asymptomatic adults (overline{age} = 49.9) performed multiple 5 m timed up and go. Participants’ head, upper trunk, pelvis, thigh, shank and foot were simultaneously tracked using AHRS and an optical motion capture system (gold standard). Each trial was segmented into basic tasks (sit-to-stand, walk, turn).ResultsAt segment level, results revealed a mean root-mean-squared-difference overline{(RMSD)} varying between 1.1° and 5.5° according to the segment tracked and the task performed, with a good to excellent agreement between the systems. Relative sensor kinematics accuracy (i.e. joint) varied between 1.6° and 13.6° over the same tasks. On a global scheme, analysis of the effect of velocity on sensor kinematics accuracy showed that AHRS are better adapted to motions performed between 50°/s and 75°/s (roughly thigh and shank while walking).ConclusionResults confirmed that pairing of modules to obtain joint kinematics affects the accuracy compared to segment kinematics. Overall, AHRS are a suitable solution for clinical evaluation of biomechanics under the multi-segment tasks performed although the variation in accuracy should be taken into consideration when judging the clinical meaningfulness of the observed changes.

Highlights

  • Joints kinematics assessment based on inertial measurement systems, which include attitude and heading reference system (AHRS), are quickly gaining in popularity for research and clinical applications

  • Combining an Inertial measurement unit (IMU) with magnetic sensors creates what is known as an attitude and heading reference system (AHRS) where data from all the sensors can be fused together to provide a 3D orientation estimation of the platform with respect to a reference inertial frame based on magnetic North and Gravity

  • The objective of the present study is to evaluate the variation in sensor kinematics accuracy of the orientation data from commercially available AHRS positioned on the head, the upper back, the pelvis, the thigh, the shank and the foot during multiple tasks realized at different paces in order to better understand their optimal use in biomechanics

Read more

Summary

Introduction

Joints kinematics assessment based on inertial measurement systems, which include attitude and heading reference system (AHRS), are quickly gaining in popularity for research and clinical applications. This study assessed AHRS sensors kinematics accuracy at multiple segments and joints through a variety of tasks to characterize the system’s accuracy in these specific conditions, and to extrapolate the accuracy results to a broader range of conditions using the characteristics of the movements (i.e. velocity and type of motion). Giansanti et al justify this approach saying that the frequency domain involved in a sit-to-stand transfer is specific to this task, requiring an adaptation of the fusion algorithm [31] Such statement raises concerns about the ability of AHRS to assess mobility in varying contexts. No study has verified the impact of task complexity on sensor kinematics accuracy for different mobility tasks and none attempted to go one step further, analyzing the impact of the nature of the motion (velocity and type of motion) on accuracy

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call