Inertial amplification plates for low-frequency sound and vibration reduction

Abstract

Reduction of vibration and sound radiation in the low-frequency range is a challenging task. In this work, a lever-type inertial amplification (LIA) mechanism is proposed to enhance the vibration reduction capability of thin plates. The mechanism consists of a rigid lever hinged on the host plate at two separate locations and a small mass mounted at the end of the lever. Band-structures of the unit cell and vibration transmissibility of the finite LIA plate are computed using the finite element method. Numerical results show that compared with the local resonant (LR) plates with the same added mass, the proposed LIA plates generate wider and deeper complete bandgaps at the same target frequency. The Bragg bandgaps occurring at higher frequencies are also broader compared with those of the LR plates due to a stronger impedance mismatch between the host plate and the attachments. Moreover, the vibration reduction performance of the LIA plate presents unique direction-dependent characteristics: maximum vibration attenuation is achieved when the LIA mechanisms are installed parallel to the wave propagation direction.