Abstract

The paper presents the possibility of using the Kinect v2 module to control an industrial robot by means of gestures and voice commands. It describes the elements of creating software for off-line and on-line robot control. The application for the Kinect module was developed in the C# language in the Visual Studio environment, while the industrial robot control program was developed in the RAPID language in the RobotStudio environment. The development of a two-threaded application in the RAPID language allowed separating two independent tasks for the IRB120 robot. The main task of the robot is performed in Thread No. 1 (responsible for movement). Simultaneously, Thread No. 2 ensures continuous communication with the Kinect system and provides information about the gesture and voice commands in real time without any interference in Thread No. 1. The applied solution allows the robot to work in industrial conditions without the negative impact of the communication task on the time of the robot’s work cycles. Thanks to the development of a digital twin of the real robot station, tests of proper application functioning in off-line mode (without using a real robot) were conducted. The obtained results were verified on-line (on the real test station). Tests of the correctness of gesture recognition were carried out, and the robot recognized all programmed gestures. Another test carried out was the recognition and execution of voice commands. A difference in the time of task completion between the actual and virtual station was noticed; the average difference was 0.67 s. The last test carried out was to examine the impact of interference on the recognition of voice commands. With a 10 dB difference between the command and noise, the recognition of voice commands was equal to 91.43%. The developed computer programs have a modular structure, which enables easy adaptation to process requirements.

Highlights

  • The development of electronics, especially sensorics, results in a constant change in the way people interact with electronic devices

  • Human interaction with an industrial robot using a vision system equipped with microphones seems to be an interesting and promising solution for future robot programming

  • The combination of gestures and voice commands seems to be an interesting issue in terms of robot control, especially since the advantage of using gestures and voice commands in interaction with the machine is the ability to adapt dynamically

Read more

Summary

Introduction

The development of electronics, especially sensorics, results in a constant change in the way people interact with electronic devices. The development of electronics and vision systems contributes to the development of a new way of human interaction with devices, which creates completely new possibilities for designing and applying new computer applications. This is evident in interfaces to video surveillance and game applications. The movements of the human body can be considered as segments [1] that express a specific meaning in specific time periods. During a conversation, people often gesture, emphasizing the meaning of spoken words. Sequences of gestures can indicate to the Sensors 2020, 20, 6358; doi:10.3390/s20216358 www.mdpi.com/journal/sensors

Objectives
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call