Indoor experimental analysis of Serpentine-Based cooling scheme for high concentration photovoltaic thermal systems

Abstract

High concentration photovoltaic thermal hybrids are expected to play an important role in meeting growing energy demands. When approaching concentrations over 1000 suns, a cooling system is needed to maximise both the thermal and electrical performance of the multi-junction solar cell without producing excessive parasitic losses.This study develops a novel simulation model to provide an in-depth understanding of the functionality of a concentrated photovoltaic thermal hybrid system with serpentine-based cooling systems. An ultra-high concentrator photovoltaic optic irradiance profile (peak effective concentration ratio: ∼1500 suns) is considered within the simulation model, which has been validated through indoor experimentation. The effectiveness of cooling is also evaluated through maximum thermal stresses generated in the multi-junction solar cell. The double serpentine design was deemed the highest performing, primarily because of the single serpentine’s excessive pressure drop. Copper as the heat sink material yielded superior performance because of its higher thermal conductivity. The maximum total exergetic efficiency achieved by the receiver was ∼ 10.9% with this configuration. Compared to some examples in the literature this value may seem low, however, it is more accurate due to the inclusion of a specific irradiance profile. All serpentine-based cooling systems could maintain the recommended operating temperature.