Indoor airborne disinfection with electrostatic disinfector (ESD): Numerical simulations of ESD performance and reduction of computing time

Abstract

Airborne transmissions of infectious disease (e.g. SARS-CoV-2) in indoor environments may induce serious threat to public health. Air purification devices are necessary to remove and/or inactivate airborne biological species from indoor air environment. Corona discharge in an electrostatic precipitator is capable of removing particulate matter and disinfecting biological aerosols to act as electrostatic disinfector (ESD). The ions generated by ESD can effectively inactivate bacteria/viruses. However, the available research rarely investigated disinfection effect of ESD, and it is urgent to develop quantitative ESD design methods for building mechanical ventilation applications. This study developed an integrated numerical model to simulate disinfection performance of ESD. The numerical model considers the ionized electric field, electrohydrodynamic flow, and biological disinfection. The model prediction was validated with the experimental data (E. coli): Good agreement was observed. The validated model then was used to study the influences of essential design parameters (e.g. voltage, inlet velocity) of ESD on disinfection efficiency. The effects of modeling of electrophoretic force and EHD (electrohydrodynamic) flow patterns on disinfection efficiency and computing time were also analyzed. The disinfection efficiency of well-designed ESD (with space charge density of 3.6 × 10−06 C/m3) could be as high as 100%. Compared with HEPA, ESD could save 99% of energy consumed by HEPA without sacrificing disinfection efficiency.