Indole derivatives efficacy and kinetics for inhibiting carbon steel corrosion in sulfuric acid media

Abstract

The global prevalence of metal corrosion is a significant challenge due to its detrimental effect. Environmentally friendly and non-hazardous alternatives for harmful and poisonous synthetic corrosion inhibitors are urgently necessary due to increasing environmental concerns and regulations prohibiting their application. In this study, indole molecules were employed as carbon steel corrosion inhibitors in acidic conditions. Gravimetrical and scanning electronic microscope (SEM) analysis was used in a preliminary investigation of indole as an organic inhibitor. The results revealed that adding indole to carbon steel before exposing it to sulfuric acid slowed and induced resistance to corrosion. The indole affixed themselves to the steel carbon surfaces, producing a barrier/protection for carbon steel. The efficacy of the indole in preventing corrosion was determined through the weight loss method. Temperature and inhibitory concentration effects on inhibition effectiveness under varying parameters were also reported. The temperatures employed were between 298 K and 328 K, while the inhibitor concentrations ranged from 1.2 × 10−3 M to 7.6 × 10−3 M, and both parameters significantly influenced corrosion inhibition effectiveness. The inhibitory mixture attained optimum efficacy in inhibiting corrosion, at 81 %, when the lowest and highest respective temperature and concentration were applied. The kinetic analysis was conducted under a range of temperatures to determine the reaction mechanisms of the inhibitor. The thermal adsorption isotherm of the inhibitor indicated that the surface adhered to Langmuir's adsorption isotherm. Additionally, investigations on corrosion and inhibition using the electrochemical impedance spectroscopy method (EIS) were conducted. This study can provide in-depth knowledge for advancing inhibitory science and engineering to enhance corrosion resistance in acidic media.