Abstract

Indium sulfide (In2S3) thin films have been synthesized by chemical bath deposition technique onto glass substrates using In(NO3)3 as indium precursor and thioacetamide as sulfur source. X-ray diffraction studies have shown that the crystalline state of the as-prepared and the annealed films is β-In2S3. Optical band gap values between 2.27 and 2.41eV were obtained for these films. The In2S3 thin films are photosensitive with an electrical conductivity value in the range of 10−3–10−7(Ωcm)−1, depending on the film preparation conditions. We have demonstrated that the In2S3 thin films obtained in this work are suitable candidates to be used as window layer in thin film solar cells. These films were integrated in SnO2:F/In2S3/Sb2S3/PbS/C–Ag solar cell structures, which showed an open circuit voltage of 630mV and a short circuit current density of 0.6mA/cm2.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.