Indirect fuel cell based on a redox-flow battery with a new structure to avoid cross-contamination toward the non-use of noble metals

Abstract

An indirect fuel cell system is constructed. The system is composed of a redox flow battery (RFB) to extract electrical energy and two chemical reactors (anolyte and catholyte regenerators). A quinone as a redox mediator is reduced by a mixture of hydrogen and carbon monoxide in the anolyte regenerator, whereas a polyoxometalate as another redox mediator is oxidized in the catholyte regenerator, followed by a steady-state power generation at the RFB using the two redox mediators as active materials. This system demonstrates how to reduce the amount of platinum required in a proton-exchange membrane fuel cell (PEMFC), especially when using a fuel other than pure hydrogen. The RFB in our system contains two gas-diffusion electrodes (GDEs) with a platinum electrocatalyst to insert a “pure hydrogen gas phase” between the anolyte and catholyte to avoid cross-contamination. These two GDEs participate in the hydrogen evolution reaction and hydrogen oxidation reaction, respectively, and require only a small amount of platinum. In addition, the catalysts used in the anolyte regenerator are rhodium complexes. However, these catalysts are in a dissolved state (molecular catalysts) with micromolar-order concentrations, and very little noble metal is used. A carbonaceous catalyst without platinum is used in the catholyte regenerator. This eliminates the need for a noble metal for the oxygen reduction reaction, which is the main reason why platinum is used in a large amount in a conventional PEMFC. Steady-state operations of the anode side, the cathode side, and the total system are demonstrated in this work. Although a small amount of noble metal is still required at this stage, this work may contribute to the complete elimination of noble metals from a PEMFC.