Indirect evaporative cooling and economy cycle in summer air conditioning

Abstract

The air-side economy cycle has a large application in warm and dry climates, where the simple increase in the amount of outside air supplied to the conditioned space can substantially reduce the cooling load. Although the dry-bulb economy cycle is the simplest implementation, requiring only a dry-bulb temperature comparison to operate the air flow rate regulation, the greatest potential in cost reduction is achieved by the wet-bulb economizer (WBE). Indirect evaporative cooling (IEC), based on energy recovery from the saturated exhaust airflow, is another technique to be applied in the reduction of a building cooling load. Preconditioning the outdoor airflow by IEC actually extends the applicability of the WBE. In such a way, specific synergies can be exploited when WBE and IEC are combined, even in humid climates. On the other hand, the largest benefits can be accomplished only by redefining the control strategy of the outside air flow rate. In the present paper, the outside air flow rate control strategies are described both for simple WBE and for preconditioned WBE cycles. Different regulation regions are defined on the psychrometric chart together with the relative control strategies. The incidence of these regions is evaluated for 14 different European and American climates. Finally, the seasonal cooling energy requirements are determined for the dehumidification by cooling process, which can be considered as mainly responsible for cooling energy costs in the considered localities. Traditional, preconditioned by heat recovery and IEC on the exhaust airflow, WBE and PWBE air conditioning cycles are compared. Copyright © 2003 John Wiley & Sons, Ltd.