Abstract

Due to the significant acoustic impedance contrast at cortical boundaries, highly inside attenuation, and the unknown sound velocity distribution, accurate ultrasound cortical bone imaging remains a challenge, especially for the traditional pulse-echo modalities using unique sound velocity. Moreover, the large amounts of data recorded by multielement probe results in a relatively time-consuming reconstruction process. To overcome these limitations, this article proposed an index-rotated fast ultrasound imaging method based on predicted velocity model (IR-FUI-VP) for cortical cross section ultrasound tomography (UST) imaging, utilizing ray-tracing synthetic aperture (RTSA). In virtue of ring probe, the sound velocity model was predicted in advance using bent-ray inversion (BRI). With the predicted velocity model, index-rotated fast ultrasound imaging (IR-FUI) was further applied to image the cortical cross sections in the sectors corresponding to the dynamic apertures (DAs) and ring center. The final result was merged by all sector images. One cortical bone phantom and two ex vivo bovine femurs were utilized to demonstrate the performance of the proposed method. Compared to the conventional synthetic aperture (SA) imaging, the method can not only accurately image the outer cortical boundary but also precisely reconstruct the inner cortical surface. The mean relative errors of the predicted sound velocity in the region of interest (ROI) were all smaller than 7%, and the mean errors of cortical thickness are all less than 0.31 mm. The reconstructed images of bovine femurs were in good agreement with the reference images scanned by micro-computed tomography ( μ CT) with respect to the morphology and thickness. The speed of IR-FUI is about 3.73 times faster than the traditional SA. It is proved that the proposed IR-FUI-VP-based UST is an effective way for fast and accurate cortical bone imaging.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call