Abstract

Enhancing the charge separation efficiency through interface engineering of In2O3-based photoanodes represents a critical and complex research endeavor in the field of water splitting. Herein, we report a self-catalyzed growth of intrinsic Indium oxide (In2O3) Nanowires (NWs) and Tungsten nitride/Indium oxide (W2N/In2O3) composite nanowires (CNWs) on c-Si substrates by plasma assisted reactive thermal evaporation (PARTE) and nitrogen plasma assisted in-situ thermal annealing, respectively. The nitrogen plasma assisted in-situ thermal annealing effectively transforms the intrinsic In2O3 NWs to W2N/In2O3 CNWs. The optical energy gap, Eg gradually decreases from 2.49 to 2.40 eV when combine with W2N nanostructures. Decrease in the Eg simultaneously increases the photocurrent density of W2N/In2O3 CNWs at V = 0.4 V from 1.9 to 3.8 mA/cm2. This could attribute to the effective electron−hole separations at the interfaces of the heterojunction CNWs. The correlation between the substantially prolonged lifetime of charge carriers and narrowing the bandgap of the composite NWs could be feasible as a good electrochemical electrode. Moreover, the self-catalyzed and secondary growth mechanisms of hierarchically branched In2O3 NWs and W2N/In2O3 CNWs are discussed.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.