Incremental Feeding High-Pressure Sliding (IF-HPS) Process for Upscaling Highly Strained Areas in Metallic Materials with Enhanced Mechanical Properties

Abstract

This paper presents an overview of the recent development of incremental feeding high-pressure sliding (IF-HPS) process for grain refinement of metallic sheets with enlarged areas. The IF-HPS process is a method of severe plastic deformation (SPD) under high pressure without increasing the machine capacity. The IF-HPS process combines an incremental feeding technique with the high-pressure sliding (HPS) process so that a severely deformed area can be extended. Development of the IF-HPS process includes the use of flat-type anvils instead of groove-type anvils, which makes it easier to enlarge the SPD-processed areas. The development is also described in terms of the sliding mode and the feeding pattern, where the former is determined by the sliding distance and the numbers of the reciprocation of the sliding and the latter by the feeding distance and the feeding direction. The application of the IF-HPS process is made to metallic materials such as a Ni-based superalloy (Inconel 718), a Ti-6Al-7Nb alloy (F1295) and commercially available Al alloys (A1050, A3105, A5052 and A5182). It is shown that the grain refinement is successfully achieved so that superplastic elongation more than 400% is attained in the Ni- and Ti-based alloys, and the room-temperature tensile strength is well enhanced in the Al alloys. It is then demonstrated that the IF-HPS process is promising to extend the SPD-processed area without increasing the machine capacity. Furthermore, a new approach is suggested for material design, such as the hybrid materials composed of conventional and fine-grained materials and functionally graded materials.