Abstract
AbstractMeasurements of wave characteristics have been conducted in a 0.0762 m internal diameter (ID) pipe at inclinations of 0°, 10°, 20°, 45°, 60°, 75°, and 90° from horizontal. Wave celerity and frequency are very strongly dependent on modified Lockhart–Martinelli parameter, X*, and the inclination angle. Wave amplitude increases with increasing liquid film thickness at the bottom of the pipe. Wave amplitude depends on liquid film thickness for any pipe diameter, surface tension, and viscosity. Strouhal number (dimensionless wave frequency) decreases with increasing X*. Effect of pipe diameter, surface tension, and liquid viscosity on the liquid film Reynolds number, ReLF, was studied. ReLF variation with X* is not sensitive to the surface tension and less sensitive to the pipe diameter. However, ReLF is very sensitive to the viscosity of the flowing liquid. Correlations for wave celerity, amplitude, frequency, and liquid film Reynolds number are proposed. © 2011 American Institute of Chemical Engineers AIChE J, 2012
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.