Abstract

Research subject. The article presents the results of a microscopic and photogoniometric study of natural rounded diamonds of tetraghexahedral habit from the kimberlite pipe “Internationalnaya” (Yakutia). The diamonds was partially dissolved in a sulphur-containing iron melt (sulphur content of 15–30 wt %) at 4.5 GPa and 1450ºС.Methods. The experiments were carried out on a multi-puncheon apparatus of a “split-sphere” type in high-pressure solid-phase cells made of refractory oxides ZrO2, CaO, MgO using a cylindrical shape graphite heater. The crystals were studied using an MBS-10 optical microscope with a photo camera, and a Jeol JSM-6510LV scanning electron microscope. A goniometric study of diamond crystals was carried out by a photo method in a cylindrical chamber. It was found that when a sulphur content was 15 wt %, diamond crystals of tetrahexahedral habit were transformed into a curved shaped octahedroids with morphological features similar to natural diamonds found in kimberlites. When the sulphur content was 23–30 wt %, the rate of dissolution of diamonds in the Fe-S melt sharply reduced, while the diamond surface at the micro level became covered with numerous etching hillocks, whose sidewalls have surfaces similar to flat-faced {111} form. Dissolution of the rounded diamonds in the Fe-S melt at high pressure occurred by a “normal” mechanism, that is perpendicular to the surface of the dissolving crystal through trigonal dissolution layers, while a tangential-layered mechanism played a minor role.Conclusion. The natural diamond crystals could underwent dissolution in the mantle before they were captured by kimberlite magma. Two fundamentally different types of homomorphic and typomorphic features of the dissolution forms observed on natural diamonds can be determined, namely: on one side, those associated with storage in mantle before the crystals were captured by the kimberlite magma, and on the other side, with the kimberlite process itself. The presence of octahedral diamonds with parallel (trigonal) striation in kimberlite deposits may indicate on a high degree of diamond preservation due to relatively insignificant effect of the kimberlite magma. This, undoubtedly, should help to decipher the diamond genesis and, possibly, improve the mineralogical criteria used in diamond exploration.

Highlights

  • It was found that when a sulphur content was 15 wt %, diamond crystals of tetrahexahedral habit were transformed into a curved shaped octahedroids with morphological features similar to natural diamonds found in kimberlites

  • Dissolution of the rounded diamonds in the Fe-S melt at high pressure occurred by a “normal” mechanism, that is perpendicular to the surface of the dissolving crystal through trigonal dissolution layers, while a tangential-layered mechanism played a minor role

  • The natural diamond crystals could underwent dissolution in the mantle before they were captured by kimberlite magma

Read more

Summary

РЕЗУЛЬТАТЫ И ОБСУЖДЕНИЕ

Кристаллы алмаза в экспериментах испытали разную степень растворения (см. табл. 1). Так как условия всех опытов были одинаковыми, эти различия обусловлены вариациями в содержании серы в Fe-S расплаве. Кристаллы алмаза в экспериментах испытали разную степень растворения Оптические фотографии кристаллов алмаза после экспериментов представлены на рис. В отличие от алмаза D3 на кристалле D1 после первого с ним эксперимента %) появилось слабое матирование поверхности, усилившееся после второго эксперимента 2. Матирование поверхности вызвано появлением многочисленных бугорков травления размером менее 10 мкм. Около выхода осей симметрии L4 они представляли собой ограненные четырехгранные пирамидки. После второго эксперимента размеры бугорков травления увеличились. Вблизи выхода осей симметрии L3 скульптуры растворения состояли из треугольных пластинок, надвигающихся друг на друга в виде черепитчатого узора. Условия и результаты экспериментов по растворению алмазов (4 ГПа, 1450°С, длительность 1 ч)

No опыта
СПИСОК ЛИТЕРАТУРЫ

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.