Abstract

At the present time, the sewage treatment plants in the United Kingdom produce about 25,000,000 t of sewage sludge each year at a concentration of 4 solids. New regulations in the United Kingdom forbid sea dumping, and in the near future new incinerators will be required to dispose of about 5,000,000 t per year. The research program at the Sheffield University consisted of design and construction of a small-scale cylindrical rotating fluidized bed incinerator with an inside diameter of 200 mm and an axial length of up to 200 mm. The fluidizing medium was silica sand (0.6–0.7 mm) and the bed depth 30–50 mm. The rotational speed of the bed varied between 100 and 1,000 rpm (which produced 1–100 g loading). Coal, oil, sewage sludge, and chicken manure (biomass) were burnt in the bed at temperatures between 700° and 900°C. Measurements of heat transfer rate, bed temperature, and exhaust gas composition were carried out over a range of operating conditions. The influence of rotational forces on basic fluidizati...

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.