In vivo assessment of the corrosion of nickel-titanium orthodontic archwires by using scanning electron microscopy and atomic force microscopy.

Abstract

This study was undertaken to assess in vivo the corrosion in two commercial nickel-titanium (NiTi) orthodontic archwires removed from the oral cavity of patients using fluoride mouthwashes. Five volunteers took part in this study on the corrosion behavior of two brands of NiTi archwires (3M and AO (brand of archwire)) during use of two mouthwashes with neutral sodium fluoride 1.1%, one with acidulated fluoride 1.1%, and one with placebo and a control group. Each patient used one mouthwash in three different periods of time for 1 min a day for 30 days. The archwires were assessed with scanning electron microscopy and atomic force microscopy for qualitative and quantitative analysis. The values obtained with atomic force microscopy (AFM) were submitted to normality test, two-way analysis of variance, and Tukey's test at a significance level of 5%. The AFM images showed a gradual qualitative increase in the roughness of both types of wire between the treatments: control < placebo < neutral fluoride < acidulated fluoride. The arithmetic average of the roughness and root mean square of the roughness were similar. As for 3M archwires, only the acidulated fluoride group differed statistically from the others. As for AO archwires, the control and placebo groups did not differ from each other, but differed from the other fluoride treatments. The group using neutral fluoride also differed significantly from the acidulated fluoride group. 3M archwires were not affected by daily oral challenges. AO archwires were not affected by daily oral challenges either; their association with fluoride, either neutral or acidulated, increased their roughness.