Abstract
Acetylene (C2H2) plasma immersion ion implantation–deposition (PIII–D) was conducted on polyethylene terephthalate (PET) to improve its blood compatibility. The platelet adhesion and activation behavior of PET treated by C2H2 PIII–D at different working pressures was investigated. Raman spectroscopy results show that amorphous carbon films were successfully deposited on the PET surfaces. X-ray photoelectron spectroscopy (XPS) analysis indicates that carbon films of various sp2/sp3 composition are formed at different working pressures and the sp3 hybridized C content in the films increases as a function of pressure. Platelet adhesion experiments were conducted to examine the blood compatibility in vitro. Optical microscopy reveals that the amounts of adherent platelets on all modified PET films are less than that on the untreated surface. The adhered platelets on carbon films deposited at 0.5Pa and 1.0Pa working pressure are about 32% and 55%, respectively, of that for the untreated PET surface. The platelets are observed to be isolated and round on carbon films deposited at 0.5Pa, indicating that fewer platelets are activated on the amorphous carbon films. These results thus shows that amorphous carbon films deposited on PET by C2H2 PIII–D suppress platelet adhesion and activation, and the extent of the improvement is related to the structure of the carbon films.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
