In Vitro Evaluation of Push-Out Bond Strength in Three Different Post Systems

Abstract

Background and objectives: Intimate adaptation to the canal walls is accomplished by custom-made posts which leave an even thickness of cement layer. Therefore, this study has been conducted for assessing the strength of push-out bond among prefabricated fiber posts, relined fiberglass posts, and zirconium posts using resin cement of self-adhesive and adhesive. The mode of failure was also assessed. Materials and Methods: Sixty uniradicular teeth were endodontically treated. According to the kind of post system and cement utilized (n=10), the specimens were separated randomly into six groups. Zirconium oxide post, customized glass fiber post, and glass fiber post were used. The roots were divided into three discs: apical, middle, and cervical sections. After that, the discs were put through a push-out test, and the fracture mode was examined using a stereomicroscopic loupe. Results: The highest push-out value was recorded for the relined post (8±2.83 MPa), and the lowest was registered with no significant differences for the prefabricated post (7.27±3.76 MPa). There were no significant differences in strength bond across the various posts and root regions (P?.05). Adhesive failure at the dentin-cement interfaces for the prefabricated and relined post was (60, 57) % respectively, and zirconium oxide post was (22%). Conclusions: Relined posts may be a suitable clinical situation as a post material selection with reduced clinical steps. When posts are joined using self-adhesive and adhesive resin cement, the root region has no important influence on the strength of the bond.