In Vitro and in Vivo Studies on Two-Step Alkali-Fluoride-Treated Mg-Zn-Y-Nd Alloy for Vascular Stent Application: Enhancement in Corrosion Resistance and Biocompatibility.

Abstract

Bioabsorbable magnesium alloys are becoming prominent materials for cardiovascular stents, as their desirable mechanical properties and favorable biosafety. However, the rapid corrosion of magnesium alloys under physiological conditions hinders their wider application as medical implant materials. Fluoride chemical conversion treatment is an effective and simple technique to improve the corrosion resistance for magnesium alloys. Despite previous literature reporting on fluoride chemical conversion treatment with hydrofluoric acid (HF) in different conditions, some defects are still present on the surface of the coating. In this study, we report on a two-step alkali-fluoride treatment of magnesium alloy by effectively removing the second phase in the substrate surface and form a dense and flawless magnesium fluoride (MgF2) coating to endow the magnesium alloy greater corrosion resistance. The results showed that the serious pitting corrosion caused by galvanic corrosion could be effectively prevented after removing of the second phase of the surface. In vivo tests in a rat subcutaneous implantation model showed that two-step alkali-fluoride-treated MgZnYNd alloy (MgZnYNd-A-F) uniformly corroded with a low corrosion rate. No subcutaneous gas cavities or significant inflammatory cell infiltration were observed for MgZnYNd-A-F in in vivo tests. The two-step alkali-fluoride treatment can significantly improve the corrosion resistance and biocompatibility of magnesium alloy, which has great potential in the application of vascular stents because of its simplicity and effectiveness.