Abstract
Polytetrafluoroethylene (PTFE) is widely regarded as an excellent candidate for solid lubrication in vacuum. However, it is often precluded from many prac- tical applications due to its intrinsically high wear rate. Over the past decade, it has been discovered that small loading fractions of alumina nanofillers can increase the wear resistance of PTFE by three to four orders of mag- nitude. This dramatic increase in wear resistance has in turn prompted numerous tribological studies to examine the robustness of this performance. In this study, the wear and friction behavior of unfilled PTFE and PTFE and alumina nanocomposites were evaluated under a broad range of vacuum environments from 760 to 4 9 10 -6 Torr. The nanocomposites of PTFE/alumina showed a dramatic increase in wear of over two orders of magnitude at the highest vacuum conditions. There appears to be an optimal vacuum environment around 1-10 Torr, in which these samples achieved the lowest wear rates of approximately 2.5 9 10 -7 mm 3 /(Nm).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
