Abstract
In this paper the applicability of an in situ ultrasonic diagnostic technique in understanding the formation process of zeolite X with a novel morphology was demonstrated. The complexity of the starting fly ash feedstock demands independent studies of the formation process for each type of zeolite since it is not known whether the crystallization mechanism will always follow the expected reaction pathway. The hierarchical zeolite X was noted to follow a solution phase-mediated crystallization mechanism which differs from earlier studies of the zeolite A formation process from unaged, clear solution extracted from fused fly ash. The use of the in situ ultrasonic monitoring system provided sufficient data points which enabled closer estimation of the time of transition from the nucleation to the crystal growth step. In order to evaluate the effect of temperature on the resulting in situ attenuation signal, synthesis at three higher temperatures (80, 90 and 94°C) was investigated. It was shown, by the shift of the US-attenuation signal, that faster crystallization occurred when higher temperatures were applied. The novel hierarchical zeolite X was comprised of intergrown disc-like platelets. It was further observed that there was preferential growth of the disc-shaped platelets of zeolite X crystals in one dimension as the synthesis temperature was increased, allowing tailoring of the hierarchical morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.