In Situ Trapping Strategy Enables a High-Loading Ni Single-Atom Catalyst as a Separator Modifier for a High-Performance Li-S Battery.

Abstract

The poor electrochemical reaction kinetics of Li polysulfides is a key barrier that prevents the Li-S batteries from widespread applications. Ni single atoms dispersed on carbon matrixes derived from ZIF-8 are a promising type of catalyst for accelerating the conversion of active sulfur species. However, Ni favors a square-planar coordination that can only be doped on the external surface of ZIF-8, leading to a low loading amount of Ni single atoms after pyrolysis. Herein, we demonstrate an in situ trapping strategy to synthesize Ni and melamine-codoped ZIF-8 precursor (Ni-ZIF-8-MA) by simultaneously introducing melamine and Ni during the synthesis of ZIF-8, which can remarkably decrease the particle size of ZIF-8 and further anchor Ni via Ni-N6 coordination. Consequently, a novel high-loading Ni single-atom (3.3 wt %) catalyst implanted in an N-doped nanocarbon matrix (Ni@NNC) is obtained after high-temperature pyrolysis. This catalyst as a separator modifier shows a superior catalytic effect on the electrochemical transitions of Li polysulfides, which endows the corresponding Li-S batteries with a high specific capacity of 1232.4 mA h g-1 at 0.3 C and an excellent rate capability of 814.9 mA h g-1 at 3 C. Furthermore, a superior areal capacity of 4.6 mA h cm-2 with stable cycling over 160 cycles can be achieved under a critical condition with a low electrolyte/sulfur ratio (8.4 μL mg-1) and high sulfur loading (4.85 mg cm-2). The outstanding electrochemical performances can be attributed to the strong adsorption and fast conversion of Li polysulfides on the highly dense active sites of Ni@NNC. This intriguing work provides new inspirations for designing high-loading single-atom catalysts applied in Li-S batteries.