Abstract
The electrochemical conversion behavior of metal oxides as well as its influence on the lithium-storage performance remains unclear. In this paper, we studied the dynamic electrochemical conversion process of CuO/graphene as anode by in situ transmission electron microscopy. The microscopic conversion behavior of the electrode was further correlated with its macroscopic lithium-storage properties. During the first lithiation, the porous CuO nanoparticles transformed to numerous Cu nanograins (2-3 nm) embedded in Li2O matrix. The porous spaces were found to be favorable for accommodating the volume expansion during lithium insertion. Two types of irreversible processes were revealed during the lithiation-delithiation cycles. First, the nature of the charge-discharge process of CuO anode is a reversible phase conversion between Cu2O and Cu nanograins. The delithiation reaction cannot recover the electrode to its pristine structure (CuO), which is responsible for about ∼55% of the capacity fading in the first cycle. Second, there is a severe nanograin aggregation during the initial conversion cycles, which leads to low Coulombic efficiency. This finding could also account for the electrochemical behaviors of other transition metal oxide anodes that operate with similar electrochemical conversion mechanism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.