Abstract
In this article, we address in situ synthesis of polyethylene terephthalate (PET) nanocomposites using the bis (2‐hydroxyethyl) phthalate monomer and inorganic layered materials (sulfanilic acid salt‐modified magnesium aluminum‐layered double hydroxides [MgAl LDH‐SAS] and Dimethyloctadecyl [3‐(trimethoxysilyl) propyl] ammonium chloride [DTSACl] and tetraethyl orthosilicate [TEOS]‐ modified clay [CL120‐DT]). The dispersion morphology of the synthesized nanocomposites was evaluated using XRD and TEM, from these results, it was confirmed that 0.5 wt% loaded PET/MgAl LDH‐SAS and PET/CL120‐DT nanocomposites have flocculated and intercalated morphologies, respectively. Thermomechanical analyses were performed by thermogravimetric analysis, dynamic mechanical analysis, and differential scanning calorimetry, respectively. Moreover, the water vapor transmission rate (WVTR) values of a pure PET, PET/CL120‐DT 0.5 wt%, and PET/MgAl LDH‐SAS 0.5 wt% nanocomposites were found to be 49, 45, and 46 g·m−2·day−1, respectively. Furthermore, the gas barrier properties of PET composite films containing various amounts of inorganic nanoparticles were investigated using Gas permeability analysis (GPA).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.