Abstract
The effect of nitrate on the iron dissolution in artificial corrosion pits in chloride-containing solutions has been studied with in-situ synchrotron X-ray diffraction and ex-situ Raman spectroscopy. A black layer containing Fe3C and carbon was found in the pit in pure 1 M HCl at 0.1 V(Ag/AgCl), but at higher voltages up to 1 V(Ag/AgCl), the black layer was not observed and Fe3C was not detected. The dissolution of Fe3C at low potentials may be inhibited by a carbon layer. In the presence of nitrate, the black layer containing Fe3C was present at all the voltages tested, and current fluctuations were observed and found to be potential-dependent, with greater fluctuations at higher voltages. After dissolution in 1 M HCl, the metal surface appeared slightly roughened with some small cavities, but the surface became crystallographically etched after dissolution in 1 M HCl and 50 mM NaNO3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.