Abstract

The aim of the study was to investigate the sorption interactions between phenol and materials obtained from four different underground coal gasification (UCG) ex-situ simulations. These interactions are significant in terms of the impact of the UCG on the groundwater environment. Sorption parameters were determined for two sample types: raw coal mined from the coal-bed and then subjected to the gasification process; and char residue acquired from the cavity formed as a result of the UCG processes. Laboratory-scale tests were carried out using deionized water and aqueous solutions with increasing concentrations of phenol (from 50 mg/dm3 to 2000 mg/dm3) at 298 K. On the assumption of physical interactions (non-specific physisorption) and due to a nonlinear mass distribution of adsorbed substances as a function of equilibrium concentration, the Freundlich isotherm model was applied to describe adsorption phenomena. The isotherms have good fitting (R2 from 0.5716 to 0.9811). Relatively high percentage phenol removal efficiency was observed for all tested chars (from 17.0% to 99.8% for the 1.0–2.5 mm fraction and from 6.9% to 99.6% for the 10.0–12.5 mm fraction). Additionally, the sorption characteristics was used to evaluate the retardation coefficients. The largest delay in the organic pollutant migration in the environment around a UCG reactor occurs for phenol transport in the layer of the post-process char from ‘Wesoła’ after 40 bar pressure experiment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call