Abstract
This paper investigates the fracture mechanism of wood–plastic composites (WPCs) in tension utilizing a direct observation method. Several WPC specimens with various weight fractions (with and without coupling agent) were prepared via injection molding to create complex structures of irregular-shaped wood particles randomly dispersed in a thermoplastic high-density polyethylene matrix. The crack initiation and growth in WPC samples under tension were observed using a portable tensile test setup. It was observed that debonding between the wood particles and matrix was the primary fracture mechanism in WPCs with no compatibilizer. Moreover, the orientation of the wood particle significantly affected the fracture mechanism. On the other hand, the occurrence of wood cracking in the samples made with coupling agents was indicative of the bond strengthening property of these agents. The results indicated that the added compatibilizer affected the fracture mechanism and significantly reduced the ductility. Moreover, the increased amount of wood flour reduced both the ductility and the strength of WPCs. However, it was also observed that the strength reduction can be compensated by adding coupling agent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.