Abstract
Desulfurization and deoxidation of molten iron with magnesium vapor produced in-situ by aluminothermic reduction of magnesium oxide has been developed. In the present study, the mechanism of aluminothermic reduction of magnesium oxide by use of pellets composed of magnesium oxide and aluminum powders was discussed. SEM observation of the pellets at different reduction stages for various temperatures showed that fracture and disappearance of the alumina films on the aluminum particles were stimulated above 1 473 K, and thus the reduction of magnesium oxide was greatly accelerated.From in-situ observation of the aluminothermic reduction of magnesium oxide using a high temperature optical microscope (HTOM), it was found that the reduction proceeded after the penetration of molten aluminum into the magnesium oxide phase. The penetration began at 1 273 K and it was accelerated above 1 373 K. The reduction took place violently at 1 473 K. SEM observation and EDS analysis of the cooled sample revealed that the penetration took place only through cracks of the alumina film.In-situ observation of the melting process of aluminum particles together with SEM observation of the cooled sample showed that the thermal stress and the stress formed during phase transformation could break up the alumina film and the outflow of molten aluminum did take place at the elevated temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.