In situ monitoring methods for selective laser melting additive manufacturing process based on images — A review

Abstract

Selective laser melting (SLM) has been widely used in the fields of aviation, aerospace and die manufacturing due to its ability to produce metal components with arbitrarily complex shapes. However, the instability of SLM process often leads to quality fluctuation of the formed component, which hinders the further development and application of SLM. In situ quality control during SLM process is an effective solution to the quality fluctuation of formed components. However, the basic premise of feedback control during SLM process is the rapid and accurate diagnosis of the quality. Therefore, an in situ monitoring method of SLM process, which provides quality diagnosis information for feedback control, became one of the research hotspots in this field in recent years. In this paper, the research progress of in situ monitoring during SLM process based on images is reviewed. Firstly, the significance of in situ monitoring during SLM process is analyzed. Then, the image information source of SLM process, the image acquisition systems for different detection objects (the molten pool region, the scanned layer and the powder spread layer) and the methods of the image information analysis, detection and recognition are reviewed and analyzed. Through review and analysis, it is found that the existing image analysis and detection methods during SLM process are mainly based on traditional image processing methods combined with traditional machine learning models. Finally, the main development direction of in situ monitoring during SLM process is proposed by combining with the frontier technology of image-based computer vision.