In situ measurement of soil moisture and pore-water pressures in an ‘incipient’ landslide: Lake Tutira, New Zealand

Abstract

The immediate cost of shallow regolith landslides in New Zealand has been estimated to exceed US$33M annually. Since the majority of these landslides occur during prolonged wet conditions, or intense rainstorms, moisture conditions are a critical control. The nature, dynamics, and character of soil moisture conditions, and the piezometric response to rainfall, have been recorded within an ‘incipient’ landslide for more than 5 years. The study site, on pastoral hill country within the Lake Tutira catchment in northern Hawkes Bay, is typical of large areas of New Zealand episodically affected by extensive landsliding. Detailed continuous measurements show that both the soil moisture and piezometric response within the regolith are highly storm- and site-specific. The development of positive pore pressures is infrequent; they form only during intense rainstorms, and persist for a short time. The hydraulic response of the soil is primarily a function of storm characteristics, but this response can be modified by antecedent moisture conditions, topographic position, and heterogeneity of soil properties. Stability analysis shows that most slopes in the study area are significantly steeper than can be explained by the frictional strength of the regolith. Measured hydraulic conditions also show that positive pore-water pressures alone do not trigger slope instability. A recent slope failure followed a period of extremely high antecedent moisture conditions, and occurred when maximum soil moisture conditions, though not pore-water pressures, were recorded. Increased moisture content of the regolith reduces matric tension, and therefore effective cohesion of the soil. This cohesion is critical to maintaining stability of the regolith on these slopes.