In Situ Incorporation of TiO2@Graphene Oxide (GO) Nanosheets in Polyacrylonitrile (PAN)-Based Membranes Matrix for Ultrafast Protein Separation.

Abstract

Organic polymeric ultrafiltration (UF) membranes have been widely used in protein separation due to their advantages of high flux and simple manufacturing process. However, due to the hydrophobic nature of the polymer, pure polymeric UF membranes need to be modified or hybrid to increase their flux and anti-fouling performance. In this work, tetrabutyl titanate (TBT) and graphene oxide (GO) were simultaneously added to the polyacrylonitrile (PAN) casting solution to prepare a TiO2@GO/PAN hybrid ultrafiltration membrane using a non-solvent induced phase separation (NIPS). During the phase separation process, TBT underwent a sol-gel reaction to generate hydrophilic TiO2 nanoparticles in situ. Some of the generated TiO2 nanoparticles reacted with the GO through a chelation interaction to form TiO2@GO nanocomposites. The resulting TiO2@GO nanocomposites had higher hydrophilicity than the GO. They could selectively segregate towards the membrane surface and pore walls through the solvent and non-solvent exchange during the NIPS, significantly improving the membrane's hydrophilicity. The remaining TiO2 nanoparticles were segregated from the membrane matrix to increase the membrane's porosity. Furthermore, the interaction between the GO and TiO2 also restricted the excessive segregation of the TiO2 nanoparticles and reduced their losing. The resulting TiO2@GO/PAN membrane had a water flux of 1487.6 L·m-2·h-1 and a bovine serum albumin (BSA) rejection rate of 99.5%, which were much higher than those of the currently available UF membranes. It also exhibited excellent anti-protein fouling performance. Therefore, the prepared TiO2@GO/PAN membrane has important practical applications in the field of protein separation.