Abstract

Recovery of valuable elements from (industrial process) photovoltaic wastes would be beneficial for both economical and sustainability reasons. In this work, nano zero-valent iron/activated carbon nanotubes (NZVI/ACNTs) hybrid membranes were fabricated by using NZVI as dynamic layer and CNTs as substrate for deep tellurium extraction, where the NZVI particles were formed by in situ reduction. Batch experiments were conducted to investigate the adsorption properties of NZVI/ACNTs hybrid membranes under different solution conditions such as pH, temperature, sorbent dosage, and competitive ions. Energy dispersive X-ray and X-ray photoelectron spectroscopy results confirmed good adsorption capacity of tellurium by NZVI/ACNTs through redox reactions. The tellurium adsorption capacities decreased in the presence of competitive ions and as the concentration of NO3− significantly increased, the adsorption quantity dropped from 331.6 to 286.5 mg/g. Extraction of tellurium under weakly acidic conditions had a positive effect and reached a maximum adsorption capacity about 800 mg/g at pH 4.7. Kinetic models and equilibrium isotherms fitted well to the adsorption experimental data indicating that chemical adsorption dominate during the adsorption process of NZVI/ACNTs-Te. As a reusable and high-efficient adsorbent, NZVI/ACNTs membrane has tremendous potential to handle and recycle toxic tellurium containing compounds.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.